HDMI2VGA

The HDMI2VGA passive adapter allows you to connect Murmulator-compatible devices to legacy VGA displays with ease. Designed for maximum compatibility, it requires no external power and works seamlessly with all supported boards and firmware. Whether you're bridging the gap between new and old hardware or setting up a test environment, this adapter ensures reliable signal conversion and hassle-free operation.
Latest HW Revision
2.03
Compatibility
M1P1M1P2M2P1M2P2
Source CodeRepository
LicenseGPL v3
Gerber FilesDownload
Bill of MaterialsView
SchematicsDownload

Overview

The HDMI2VGA adapter is a compact, passive solution for converting HDMI signals to VGA, making it possible to use modern devices with older monitors and projectors.

Assembly and Soldering Tips

To ensure optimal performance and reliability, careful assembly and soldering are recommended. Use the provided Gerber files and BOM to source quality components. When soldering, pay special attention to the HDMI and VGA connectors, as precise alignment and solid joints are critical for signal integrity.

  • Use a fine-tipped soldering iron for small pads and connectors.
  • Apply flux to improve solder flow and reduce the risk of cold joints.
  • Inspect all solder joints under magnification to ensure there are no bridges or weak connections.
  • Clean the board with isopropyl alcohol after soldering to remove any flux residue.
  • Double-check the orientation of all components before soldering, especially the HDMI and VGA connectors.